GTA-T Features

  • Hard brick floor and front face.

  • Stainless steel front case.

  • No floor heat (unless specified).

  • KANTHAL A1 elements.

  • KCR32CWIFI internet access to kiln status and programs, real time monitoring from any device, anywhere with internet access via the Kilncare GATEway.

  • Single or multi zone (control upgrade required for multi-zone).

  • All GTA-T have arched roof.

  • Secondary safety contactor as standard.

  • Automatic dampers can be fitted to any GTA kiln as an optional extra

  • Three years guarantee on ALL parts
     INCLUDING the elements.

  • Designed and built by Kilncare in the United Kingdom.

GTA-T Range

KILNCare GTA-T truck Kilns are versions of our GTA casting kiln range with trolley style floors which enable far greater access to the kiln base to enable easier loading.

 

Other than the trolley style floor the kilns are a GTA in every other respect, built with strength and longevity in mind.

 

Built to last

 

The front face of the kiln is protected with stainless steel to prevent heat damage through hot opening. The insert rope seal ensures an excellent seal that won't deteriorate over time.

The GTA's receive fully breathable stainless steel top and sides, with vented side slats. The door is double skinned and vented.

 

Optional automatic vents

The roof vent (2 on larger models) is operated by a manual stainless steel damper box, automatic dampers are optional, and can be fitted to all GTA-T kilns. 

This allows the roof vents to opened and closed multiple times throughout the duration of the firing at the temperatures required.

The opening and closing cycle is programmed into the controller so enabling the user to start the kiln then not have to return to it for any action other than monitoring until the cycle is finished. Extremely useful on larger models where firings can last for many days or even weeks.

 
 

GTA-T kilns in location at Westminster Adult Education centre, London, U.K.

The controller for the kiln can be held remotely to make programming the kiln an easy and comfortable process.

The KCR32CWIFI is multi-program controller designed for glass, ceramics & pottery use. It is targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed by a soak. It is supplied pre-programmed with 9 typical glass programs and 9 typical ceramics programs (which can be over-written).


The slow rate capability of the KCR32CWIFI, down to 0,1c per hour, makes it the perfect controller for complicated glass cycles.

The KCR32CWIFi has the capability to be accessed and controlled remotely from your mobile device.

This is one of the most important advances in Kilncare kilns for many years.

Using Kilncares GATEway access site you can view how your kiln is running in real time. Stop the firing or adjust programs all without even being in the same country let alone the same room.

 

The KCR32WIFI is also fitted with a USB port that allows programs to be entered that way direct from PC if required and also allows us to apply updates and run diagnostics without travelling to your kiln.

ST535CWIFI Controller (optional)

  • Multi-zone control.

  • 32 programs - each with up to 32 segments.

  • Each segment is a controlled heating/cooling ramp soak.

  • Suitable for glass or ceramics use.

  • Soak times up to nearly 100 hours.

  • Ramp rates from 1 to 999°C/hour full.

  • Program Pause & Segment Advance facilities.

  • Keypad lockable.

  • Delayed start - up to 4 days.

  • WIFI mobile access capability.

  • USB facility for fault logging and program loading.

  • Power failure recovery.

  • Energy used display.

  • Event / Damper / Fan relay output.

  • Alarm relay with alarm buzzer.

  • Mains power switch.

  • Built in the United Kingdom.

The ST535WIFI is a multi-zone controller designed for use on our larger kilns where total evenness of chamber temperature is much more difficult to maintain through simple kiln design alone. The controller monitors one section of the kiln and adjust the other sections to maintain perfect chamber uniformity with regards to temperature.

The ST535WIFI can set as low as 0.1c per hour.

The rest of the ST535WIFI is as the KCR32CWIFI.

  • 32 programs - each with up to 32 segments.

  • Each segment is a controlled heating/cooling ramp soak.

  • Suitable for glass or ceramics use.

  • Soak times up to nearly 100 hours.

  • Ramp rates from 0.1 to 999°C/hour full.

  • Program Pause & Segment Advance facilities.

  • Keyboard lockable.

  • Delayed start facility - up to 4 days.

  • WIFI mobile access capability KCR32CWIFI.

  • GATEway online firing viewing and storage.

  • Power failure recovery.

  • Energy used display.

  • Event / Damper / Fan relay output.

  • Alarm relay with alarm buzzer.

  • Mains power switch.

  • Built in the United Kingdom.

KCR32CWIFI controller

GTA-T Range Specifications

GTA-T 61

 Internal size 500mm (wide) x 500mm (deep) x 685mm (High)

 External Size  820mm (wide) x 890mm (deep) x 1680mm (High) 

 Weight  ??kg

 Power 10KW

 Amps  42A

 Voltage  230v

 Maximum Temperature  1050c

 Controller included KCR32CWIFI

GTA-T 80

 Internal size 610mm (wide) x 610mm (deep) x 610mm (High)

 External Size  930mm (wide) x 1030mm (deep) x 1680mm (High) 

 Weight  ??kg

 Power 12KW

 Amps  50A

 Voltage  230v

 Maximum Temperature  1050c

 Controller included KCR2CWIFI

GTA-T 100

 Internal size 610mm (wide) x 610mm (deep) x 760mm (High)

 External Size  930mm (wide) x 1030mm (deep) x 1680mm (High) 

 Weight  ??kg

 Power 16KW

 Amps 67A

 Voltage  230v

 Maximum Temperature  1050c

 Controller included KCR32CWIFI

GTA-T 180

 Internal size  610mm (wide) x 910mm (deep) x 910mm (High)

 External Size  930mm (wide) x 1330mm (deep) x 1700mm (High) 

 Weight  ??kg

 Power 25KW

 Amps  105A

 Voltage  230v

 Maximum Temperature  1050c

 Controller included KCR32CWIFI

GTA 270-T

 Internal size 910mm (wide) x 910mm (deep) x 910mm (High)

 External Size  1230mm (wide) x 1330mm (deep) x 1700mm (High) 

 Weight  ??kg

 Power 32KW

 Amps  134A

 Voltage  230v

 Maximum Temperature  1050c

 Controller included KCR32CWIFI

 

Support Downloads

GTA-T Instruction Manual

KCR32C Instruction Manual

GATEway Instruction Manual

About Us

Contact Us

Site Map

Cookie Policy

  • Facebook
  • Snapchat
  • Instagram
GATEWAY.jpg
MiB_Logo_Stacked_Colour_edited_edited.jp

Kilncare Limited, The Kiln Works, 907 Leek New Road, Baddeley Green, Stoke on Trent, Staffordshire, United Kingdom, ST2 7HQ

sales@kilncare.co.uk