G165 Waterwash Spraybooth

 G165 Wet Back Spraybooth Specifications

Delivery Weight 130kg

Fan  Inline centrifugal

Pump unit  Stainless steel self priming

Power supply 230 volts single phase

Construction  Fabricated steel stand with Polypropylene hood and stainless steel internal wetted parts

Finish  Frame durable powder coated

Dimensions 1655mm high x 800 mm wide x 1290 mm depth

Hood internal dimensions 638mm high x 625 mm wide x 420 mm deep , working depth 350 mm

The Kilncare wet back spraybooth has been designed to meet the ever increasing need to protect our environment.

The wet back spraybooth works on the principle of a curtain of continuous recycling water running down the rear face of the spraybooth, a glaze spray is aimed towards this curtain, the spray being guided by a powerful extraction fan, the glaze is trapped by the water curtain, whilst the air stream is pulled through the booth and into a washable stainless steel pre filter and finally into a washable filter bag. The excess glaze is washed into the tank and can at a later date be reclaimed depending on the type and colour of the glaze. There is a ball valve to allow the water to be drained and the contents of the tank removed. Any glaze materials can also be removed and disposed of safely. The booth is mounted on four castor wheels.

The G165 is primarily designed to be used by the studio potter and educational faculties for low volume production, therefore the booth does not need ducting to atmosphere making it portable around the studio environment.

These Booths are for water based materials only.

About Us

Contact Us

Site Map

Cookie Policy

  • Facebook
  • Snapchat
  • Instagram
GATEWAY.jpg
MiB_Logo_Stacked_Colour_edited_edited.jp

Kilncare Limited, The Kiln Works, 907 Leek New Road, Baddeley Green, Stoke on Trent, Staffordshire, United Kingdom, ST2 7HQ

sales@kilncare.co.uk