Internal size 1000mm (wide) x 800mm (deep) x 300mm (High)
External Size 1380mm (wide) x 1300mm (deep) x 1240mm (High)
Maximum Temperature 960c
Controller included KCR32C (KCR32C WIFI optional)
Quartz tube, Kanthal A1 "infra-red" element technology
Side ventilation with "anti-dust" stainless flaps.
Kilncare's unique breathing Stainless Steel slatted roof.
Replaceable, low density brick floor.
Gas Strut lid lift assistance.
Ultra-fast response Inconel thermocouple.
KCR32C control, 32 programs with 32 segments in each.
Optional KCR32CWIFI internet access to kiln status and programs, real time monitoring from any device, anywhere with internet access via the Kilncare GATEway.
The Eurofuser had almost 2 years of on-site testing before being released, it is now approaching two decades of faultless service..
The result is an ultra-reliable, one off kiln size that slots directly in below the renowned FK range of fusing and slumping kilns.
The kiln offers a large capacity but at a price that makes it the best pound for pound kiln of it's type available today.
The kiln is made with identical products as the ever proven FK range and quality and reliability is assured,
9 pre-set but resettable glass programs.
Low level electrics to ensure cool running and long life.
Oven baked, powder coating.
Can be used single phase or 3 phase and neutral.
Can be split for tight access into workshops or studios.
Three years guarantee on ALL parts
INCLUDING the elements.
Designed and built by Kilncare in the United Kingdom.
Quartz Element Heating System
The kiln is heated with a Quartz tube element system in the roof. Other manufacturers refer to this style of heating as Infra-red. The quality of our system is such that we are still yet to replace a single element through failure, in any Eurofuser since the kiln was introduced.
The floor on the Eurofuser is recessed by 40mm and is made from high grade refractory brick and the kiln is on castors as standard.
Internet access to view real time status and access data..
The optional KCR32C WIFI allows the user to access the kiln in real time from anywhere with internet access via the Kilncare GATEway on our website. The benefits of this are obvious as there is no longer the need to travel to the studio or work place to see how the firing is proceeding or if indeed the firing is going as planned.
Also in the GATEway, which is unique to each user via password access, there is a firings library where past firings can be stored and named, a notes section and a log amongst other features.
A few of the higher specification features of the FK are missing such as the roof vent flaps and independent heatfuse but this merely makes the Eurofuser in-line with the competition. What it does mean is that you get a bigger kiln for the money.
Features that still remain though are the unique stainless steel roof, the sprung front vent flaps, ability to split for narrow access, the same non-ceramic fibre composition.
The controller for the kiln can be held remotely to make programming the kiln an easy and comfortable process.
32 programs - each with up to 32 segments.
Each segment is a controlled heating/cooling ramp soak.
Suitable for glass or ceramics use.
Soak times up to nearly 100 hours.
Ramp rates from 1 to 999°C/hour full.
Program Pause & Segment Advance facilities.
Delayed start facility - up to 4 days.
Power failure recovery.
Energy used display.
Event / Damper / Fan relay output.
Alarm relay with alarm buzzer.
Mains power switch.
Built in the United Kingdom.
The KCR32C is multi-program controller designed for glass, ceramics & pottery use. It is
targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a
controlled heating/cooling ramp followed by a soak. It is supplied pre-programmed with 9 typical
glass programs and 9 typical ceramics programs (which can be over-written).
The slow rate capability of the KCR32C, down to 1c per hour, makes it the perfect controller for complicated glass cycles.
KCR32C WIFI Controller (Optional)
and controlled remotely from your mobile deivce.
This is one of the most important advances in Kilncare kilns for many years.
Using Kilncares GATEway access site you can view how your kiln is running in real time. Stop the firing or adjust programs all without even being in the same country let alone the same room.
The KCR32WIFI is also fitted with a USB port that allows programs to be entered that way direct from PC if required and also allows us to apply updates and run diagnostics without travelling to your kiln.
Eurofuser Instruction Manual
KCR32C Instruction Manual
GATEway Instruction Manual