Internal size 1020mm (wide) x 800mm (deep) x 320mm (High)
External Size 1420mm (wide) x 1170mm (deep) x 1300mm (High)
Maximum Temperature 960c
Controller included KCR32CWIFI
Quartz tube, Kanthal A1 "infra-red" element technology.
Angled and spring assisted viewing / vent ports in front chamber wall.
Optional automatic and programmable motorised roof vents.
Kilncare's unique breathing Stainless Steel slatted roof.
Stainless Steel roof, chamber and base.
High load, breathable and expanding walk mesh under floor.
Gas Strut lid lift assistance.
The Deluxe-fuser is the third largest member of "fuser" family and joins the Hobbyfuser, Cub-fuser, Cub-fuser-D, Pro-fuser, Pro-fuser-D, Elite-fuser and Grand-fuser.
The "fuser" family kilns all sit at the pinnacle of their respective market sector in build quality, performance and reliability and the Deluxe-fuser does the same in its own sector.
The Elite-fuser encapsulates 30 years of Kilncare glass fusing kiln manufacturing and experience ensuring that it is at the forefront.
KCR32CWIFI internet access to kiln status and programs, real time monitoring from any device, anywhere with internet access via the Kilncare GATEway.
Solid State Relay rapid response control.
High performance relay heat sink.
Ultra-fast response Inconel thermocouple.
KCR32CWIFI integral mounted.
Optional inner shelf kit
FOUR years guarantee on ALL parts
INCLUDING the elements.
Designed and built by Kilncare in the United Kingdom.
Recessed floor bricks
The floor of the Deluxe-fuser is made from high grade, lightweight insulation bricks that give both a structurally steady surface to place the work on and a thermally steady base to aid in maximum glass results.
As the bricks are not cemented in, they are easily replaced if required
The Deluxe-fuser floor is recessed by 40mm.
Heavy duty under floor walk mesh structure
Under the floor is where the Deluxe-fuser excels. Under the brickwork, the floor structure is made from heavy duty walk mesh that expands with heat without distorting, offers superb physical strength and breathes, so, as with the roof of the kiln, helps and aids cooling dramatically.
"Infra-red quartz element system
The elements are wound with Kanthal A1, renowned as the worlds best element wire. The elements are inside quartz tubes and the quartz tube element system we use is widely known as "infra-red" kiln heating.
The heating system is in the roof only.
Unlike other manufacturers, the element system in the Deluxe-fuser is fully covered under the kilns 36 month all parts guarantee.
The boards that make up the chamber are specially produced for us and are pre-fired to 1100c before inserted into the kiln to remove any shrinkage or warping that could otherwise happen.
Standard roof vents with optional motorised operation
The roof has two vents. The vents are closed with Stainless Steel vent flaps which are lined with insulation pads with an anti-dust covered surface for clean operation.
As an option, these roof vents can be motorised and are then programmed to open or close at any point through the firing cycle and just as importantly, at the end of a cycle when those painstaking 150c or so need to be shifted before the kiln can be opened.
It could make the difference between coming in to a kiln that can be unloaded in the morning, or one that has still got 3 or 4 hours of cooling before it can be opened.
The vents can also be automatically opened at the start of a crash cool then closed before annealing begins.
Shown in the above picture is Kilncare's unique vented stainless steel room construction which vastly aids cooling of the kiln.
The controller for the kiln can be held remotely to make programming the kiln an easy and comfortable process.
32 programs - each with up to 32 segments.
Each segment is a controlled heating/cooling ramp soak.
Suitable for glass or ceramics use.
Soak times up to nearly 100 hours.
Ramp rates from 1 to 999°C/hour full.
Program Pause & Segment Advance facilities.
Delayed start facility - up to 4 days.
WIFI mobile access capability KCR32CWIFI.
GATEway online firing viewing and storage.
Power failure recovery.
Energy used display.
Event / Damper / Fan relay output.
Alarm relay with alarm buzzer.
Mains power switch.
Built in the United Kingdom.
The KCR32CWIFI is multi-program controller designed for glass, ceramics & pottery use. It is targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed by a soak. It is supplied pre-programmed with 9 typical glass programs and 9 typical ceramics programs (which can be over-written).
The slow rate capability of the KCR32CWIFI, down to 1c per hour, makes it the perfect controller for complicated glass cycles.
The KCR32CWIFi has the capability to be accessed and controlled remotely from your mobile device.
This is one of the most important advances in Kilncare kilns for many years.
Using Kilncares GATEway access site you can view how your kiln is running in real time. Stop the firing or adjust programs all without even being in the same country let alone the same room.
The KCR32WIFI is also fitted with a USB port that allows programs to be entered that way direct from PC if required and also allows us to apply updates and run diagnostics without travelling to your kiln.
KCR32C Instruction Manual
GATEway Instruction Manual