The Pro-fuser

undefinedundefined

Pro-fuser.

 

undefined

Pro-fuser-D

 

.Pro-fuser and Pro-fuser-D

  • Pro-fuser Interior 850mm x 510mm x 225mm.
  • Pro-fuser-D Interior 850mm x 510mm x 330mm.
  • 6kw single phase or three phase and neutral.
  • 960c maximum temperature
  • Quartz tube "infra-red" heating system.
  • Stainless Steel.
  • lid lift assist.
  • KCR16 digital programer with 10 programs, 16 segments in each program.
  • Can be set in Centigrade or Fahrenheit
  • Fast react thermocouple.
  • Non ceramic fibre lid section.
  • Light weight refractory brick base.
  • Flat floor with no recess. Pro-fuser
  • 110mm recessed floor Pro-fuser-D
  • Astonishing performance.
  • Fast cooling.
  • Large vent/spy hole with spring return, anti dust flap.
  • Three years guarantee on ALL parts INCLUDING the elements.
  • Built and designed by Kilncare in the U.K.

 

The Pro-fuser has fantastic performance. Due to its high performance, infra-red quartz elements and well designed insulation, like the Hobbyfuser 3, the Pro-fuser will also make the all important 700c to 800c dash at a rate of nearly 450 degrees per hour even with the optional shelf installed.

This makes the Pro-fuser almost infinitely controlable ensuring the glass doesn't get "over-worked" by it being in the heat longer than is required.

 

undefined  Stainless Steel lid assist springs.

 

The lifting and closing of the lid is assisted by a pair of specifically manufactured and designed Stainless Steel coil springs at the rear of the kiln.

 

The kiln lid is made from stainless steel and lined out with non-ceramic fibre,  This method of insulation removes the danger of brick dust or particles dropping onto the glass, so making for a very clean firing environment. It also makes the Pro-fuser incredibly resistant to shock damage.
This lid construction enables the Pro-fuser to hold back the heat when needed but still release heat rapidly during the all important cooldown period.

 

 
undefined  Angled vent/spy hole with spring assist.

The front of the kiln has a large vent/peep hole which is closed using a spring assisted flap which houses our unique, anti-dust insulation pad which is taken from our larger fusing kiln models.
The vent/peep hole is angled so that the floor of the kiln and more importantly, your glass, can be seen.

 

 

undefined  Quartz "Infra-red" element system

 

The heating system is in the roof only and utilises the latest technology "infra-red" quartz tube heating elements. This method is extremely hard wearing and strong, yet in the event of an element failure the tubes are both easy and cheap to replace.
The elements are switched off when the lid is opened by an automatic safety switch.

 

The base section of the chamber is made from refractory brick. There is no retaining wall, just a flat base which we feel is important once kilns get to this size.


The metal work of the base is Stainless steel.
  
undefined
                                                Flat loading floor with recess on Profuser.

The pre-fitted control is the KCR16, which is detailed on the controls section of our web site. It has 10 programs, each having 16 segments. each segment consists of 1 x rate of climb, 1 x target temperature and 1 x dwell/hold.
9 of the KCR16 programs are pre-set with useful glass cycles for fusing and slumping float, Bullseye and Spectrum glass as well as a Bottle slumping program and a couple of stain cycles. If these programs are not as you would like them, simply alter them to your own preferences.

The KCR15 also has Program Pause, Segment Forwarding and can be set in Centigrade or Fahrenheit.
The KCR16 has its own temperature monitoring relay that will shut the kiln down in the event of an overfire situation.


The KCR16 gets its data from an ultra-fast response, stainless steel thermocouple meaning no lag between the kiln temperature and the KCR16s control.
The fact that the thermocouple is stainless steel means it is also resilient to accidental damage.

 

Pro-fuser-D

The Pro-fuser-D shares the identical chamber section, elements and control as the Pro-fuser but the base is recessed to give an additional 105mm height to the chamber so making the Pro-fuser-D a very useful 330mm.

 

The additional size does mean that the Pro-fuser-D is slightly slower than the Pro-fuser but it is still one of the faster kilns available and can still make 0 - 800c in under 50 minutes.

 

 

The Pro-fuser and Pro-fuser-D can be wired to a single phase, 30 amps supply or to a three phase and neutral, 10 amp supply. This is a unique feature for kilns of this size.

 

We build the Pro-fuser and Pro-fuser-D here, in Stoke on Trent, so parts and service will never be an issue.

 

 

 


Pro-fuser Stand (Optional)


                          undefined


             

The Pro-fuser stand has two shelves, one for the kiln to sit on and one for your own use. It raises the kiln by 650mm to a comfortable height.
It is made of steel and is powder coated in our Ultra-marine blue.
The stand is supplied ready for assembly.

 

The Pro-fuser stand is for both Pro-fuser and Pro-fuser-D




Lockable wheels for Pro-fuser Stand (optional)

 

          undefined

A further option for the Pro-fuser stand is locking, swiveling wheels.

The wheels are pre-fitted at our factory but the stand is still sent out ready for assembly.


KCR16 and KCR16 Stand (Included)

 undefined         undefined

The KCR16 can be removed from its stand mounted holster to enable it to be hand held for easy and comfortable programming.

MODEL

INTERNAL SIZE
WxDxH (mm)

EXTERNAL SIZE
WxDxH (mm)

kW   POWER  SUPPLY

Pro-fuser

 

Pro-fuser-D

850 x 510 x 225

 

850 x 510 x 330

1250 x 810 x 540

 

1250 x 810 x 635

6kW

 

6kW

   240v/415v N  

240v/415v N 

 

undefined 0% finance for 4 mounths using Paypal Credit.

 

Price includes UK delivery and V.A.T.
There may be a delivery surcharge for outlying areas.

Pro-fuser packages
Pro-fuser-D packages

Please note......if you opt for standard delivery, this is via a independent transport or courier.
The obligation of the delivery company is to get the kiln safely to your address and to deliver to ground level. However, you will need to make your own arrangements to get the kiln to your final site position. Delivery drivers will not assist in getting the kilns through narrow gates e.t.c. The independent drivers are not and cannot be contracted to help site the kiln in your final position.
For assisted delivery please contact us for a quote on Kilncare personal delivery.


The kiln will arrive boxed, on a pallet.

The pallet dimensions are 104cm x 168cm.
The Pro-fuser weighs 110kg. 

The Pro-fuser-D weighs 125kg.

 

Follow us on Facebook. Click HERE.

 

.Pro-fuser and Pro-fuser-D

  • Pro-fuser Interior 850mm x 510mm x 225mm.
  • Pro-fuser-D Interior 850mm x 510mm x 330mm.
  • 6kw single phase or three phase and neutral.
  • 960c maximum temperature
  • Quartz tube "infra-red" heating system.
  • Stainless Steel.
  • lid lift assist.
  • KCR16 digital programer with 10 programs, 16 segments in each program.
  • Can be set in Centigrade or Fahrenheit
  • Fast react thermocouple.
  • Non ceramic fibre lid section.
  • Light weight refractory brick base.
  • Flat floor with no recess. Pro-fuser
  • 110mm recessed floor Pro-fuser-D
  • Astonishing performance.
  • Fast cooling.
  • Large vent/spy hole with spring return, anti dust flap.
  • Three years guarantee on ALL parts INCLUDING the elements.
  • Built and designed by Kilncare in the U.K.

 

The Pro-fuser has fantastic performance. Due to its high performance, infra-red quartz elements and well designed insulation, like the Hobbyfuser 3, the Pro-fuser will also make the all important 700c to 800c dash at a rate of nearly 450 degrees per hour even with the optional shelf installed.

This makes the Pro-fuser almost infinitely controlable ensuring the glass doesn't get "over-worked" by it being in the heat longer than is required.

 

undefined  Stainless Steel lid assist springs.

 

The lifting and closing of the lid is assisted by a pair of specifically manufactured and designed Stainless Steel coil springs at the rear of the kiln.

 

The kiln lid is made from stainless steel and lined out with non-ceramic fibre,  This method of insulation removes the danger of brick dust or particles dropping onto the glass, so making for a very clean firing environment. It also makes the Pro-fuser incredibly resistant to shock damage.
This lid construction enables the Pro-fuser to hold back the heat when needed but still release heat rapidly during the all important cooldown period.

 

 
undefined  Angled vent/spy hole with spring assist.

The front of the kiln has a large vent/peep hole which is closed using a spring assisted flap which houses our unique, anti-dust insulation pad which is taken from our larger fusing kiln models.
The vent/peep hole is angled so that the floor of the kiln and more importantly, your glass, can be seen.

 

 

undefined  Quartz "Infra-red" element system

 

The heating system is in the roof only and utilises the latest technology "infra-red" quartz tube heating elements. This method is extremely hard wearing and strong, yet in the event of an element failure the tubes are both easy and cheap to replace.
The elements are switched off when the lid is opened by an automatic safety switch.

 

The base section of the chamber is made from refractory brick. There is no retaining wall, just a flat base which we feel is important once kilns get to this size.


The metal work of the base is Stainless steel.
  
undefined
                                                Flat loading floor with recess on Profuser.

The pre-fitted control is the KCR16, which is detailed on the controls section of our web site. It has 10 programs, each having 16 segments. each segment consists of 1 x rate of climb, 1 x target temperature and 1 x dwell/hold.
9 of the KCR16 programs are pre-set with useful glass cycles for fusing and slumping float, Bullseye and Spectrum glass as well as a Bottle slumping program and a couple of stain cycles. If these programs are not as you would like them, simply alter them to your own preferences.

The KCR15 also has Program Pause, Segment Forwarding and can be set in Centigrade or Fahrenheit.
The KCR16 has its own temperature monitoring relay that will shut the kiln down in the event of an overfire situation.



The KCR16 gets its data from an ultra-fast response, stainless steel thermocouple meaning no lag between the kiln temperature and the KCR16s control.
The fact that the thermocouple is stainless steel means it is also resilient to accidental damage.

 

Pro-fuser-D

The Pro-fuser-D shares the identical chamber section, elements and control as the Pro-fuser but the base is recessed to give an additional 105mm height to the chamber so making the Pro-fuser-D a very useful 330mm.

 

The additional size does mean that the Pro-fuser-D is slightly slower than the Pro-fuser but it is still one of the faster kilns available and can still make 0 - 800c in under 50 minutes.

 

 

The Pro-fuser and Pro-fuser-D can be wired to a single phase, 30 amps supply or to a three phase and neutral, 10 amp supply. This is a unique feature for kilns of this size.

 

We build the Pro-fuser and Pro-fuser-D here, in Stoke on Trent, so parts and service will never be an issue.

 

 

 


Pro-fuser Stand (Optional)


                          undefined


             

The Pro-fuser stand has two shelves, one for the kiln to sit on and one for your own use. It raises the kiln by 650mm to a comfortable height.
It is made of steel and is powder coated in our Ultra-marine blue.
The stand is supplied ready for assembly.

 

The Pro-fuser stand is for both Pro-fuser and Pro-fuser-D




Lockable wheels for Pro-fuser Stand (optional)

 

          undefined

A further option for the Pro-fuser stand is locking, swiveling wheels.

The wheels are pre-fitted at our factory but the stand is still sent out ready for assembly.


KCR16 and KCR16 Stand (Included)

 undefined         undefined

The KCR16 can be removed from it stand mounted holster to enable it to be hand held for easy and comfortable programming.

MODEL

INTERNAL SIZE
WxDxH (mm)

EXTERNAL SIZE
WxDxH (mm)

kW   POWER  SUPPLY

Pro-fuser

 

Pro-fuser-D

850 x 510 x 225

 

850 x 510 x 330

1250 x 810 x 540

 

1250 x 810 x 635

6kW

 

6kW

   240v/415v N  

240v/415v N 

 

Price includes UK delivery and V.A.T.
There may be a delivery surcharge for outlying areas.

Pro-fuser packages
Pro-fuser-D packages

Please note......if you opt for standard delivery, this is via independent transport or courier.
The obligation of the delivery company is to get the kiln safely to your address and to deliver to ground level. However, you will need to make your own arrangements to get the kiln to your final site position. Delivery drivers will not assist in getting the kilns through narrow gates e.t.c. The independent drivers are not and cannot be contracted to help site the kiln in your final position.
For assisted delivery please contact us for a quote on Kilncare personal delivery.

The kiln will arrive boxed, on a pallet.

The pallet dimensions are 104cm x 168cm.
The Pro-fuser weighs 110kg. 

The Pro-fuser-D weighs 125kg.

Follow us on Facebook. Click HERE.

 

 

 

MODEL

INTERNAL SIZE
WxDxH (mm)

EXTERNAL SIZE
WxDxH (mm)

kW   POWER  SUPPLY

Pro-fuser

 

Pro-fuser-D

850 x 510 x 225

 

850 x 510 x 330

1250 x 810 x 540

 

1250 x 810 x 635

6kW

 

6kW

   240v/415v N  

240v/415v N 

 undefined 0% finance for 4 mounths using Paypal Credit.

Price includes UK delivery and V.A.T.
There may be a delivery surcharge for outlying areas.

Pro-fuser packages
Pro-fuser-D packages

Please note......if you opt for standard delivery, this is via a independent transport or courier.
The obligation of the delivery company is to get the kiln safely to your address and to deliver to ground level. However, you will need to make your own arrangements to get the kiln to your final site position. Delivery drivers will not assist in getting the kilns through narrow gates e.t.c. The independent drivers are not and cannot be contracted to help site the kiln in your final position.
For assisted delivery please contact us for a quote on Kilncare personal delivery.


The kiln will arrive boxed, on a pallet.

The pallet dimensions are 104cm x 168cm.
The Pro-fuser weighs 110kg. 

The Pro-fuser-D weighs 125kg.

 

Follow us on Facebook. Click HERE.

  • View Product Image
  • View Information
  • View Specification
click icons for more information