Click icons for details and prices

See also FK range.
See also Silverline.

36 month guarantee on all parts

The Eurofuser had almost 2 years of on-site testing before being released.
The result is an ultra-reliable, one off kiln size that slots directly in below the renowned FK range of fusing and slumping kilns.
A kiln that is designed for European sales and as such is matched much closer to European fusing kilns rather than the higher specification FK range.

The kiln is made with identical products as the ever proven FK range but with a few noticable changes.

Features include

• Quartz tube, Kanthal A1 "infra-red" element technology
• Side ventilation with "anti-dust" stainless flaps.
• Kilncare's unique breathing Stainless Steel slatted roof.
• Recessed floor.
• Replaceable, low density brick floor.
• Gas Strut lid lift assistance.
• Ultra-fast response Inconel thermocouple.
• Default control ST315 (9 programs with 9 segments in each).
• 9 pre-set but resettable glass programs.
• Low level electrics to ensure cool running and long lif
• Oven baked, powder coating.
• Lockable castors.
• Can be used single phase or 3 phase and neutral.
• Can be split for tight access into workshops or studios
• British designed and built.
• 36 month guarantee on ALL parts including the element system.
• CE.

The kiln is heated with a Quartz tube element system in the roof. Other manufacturers refer to this style of heating as Infra-red. The quality of our system is such that we are still yet to replace a single element through failure, in any Eurofuser, in the six years since the kilns introduction.

The floor on the Eurofuser is recessed by 40mm and is made from high grade refractory brick and the kiln is on castors as standard.

A few of the higher specification features of the FK are missing such as the roof vent flaps and independent heatfuse but this merely makes the Eurofuser in-line with the competition. What it does mean is that you get a bigger kiln for the money.

Features that still remain though are the unique stainless steel roof, the sprung front vent flaps, ability to split for narrow access, the same non-ceramic fibre composition.

The kiln is fitted as standard with the ST315 controller, which offers 9 adjustable programs with 9 segments in each program. Each segment is a heat/cool rate, a target temperature and a hold. The controller features an in built heat fuse to protect against over firing.
Full digital display, power used, forward segment feature, pause button are all in the controller.
ST315 details are here.

Eurofusers are fired to 750c with the chosen programmer before despatch to ensure perfect operation, callibration and removal of most of the binder vapours that are released by all kilns on the first firing.

Most of all, The Eurofuser is a Kilncare built kiln and as such offers unrivalled reliability, quality and after sales service.

The kiln is covered by Kilncare 36 months guarantee on ALL parts including the elements.

See also FK range.
See also Silverline.

Internal Dimensions              External Dimensions      K.W.      Power         Max.        Price
       WxDxH (mm)                     WxDxH (mm)                       Supply        Temp       Ex V.A.T.

     1000 x 800 x 300             1360 x 1300 x 1240       10         1 or 3         960c      £3890.00       
                                                                                           Phase
                                                                                             & N           

Price of Eurofuser if collected from our factory £4668.00 inc. V.A.T.
Price of Eurofuser if delivered via independant transport  £4872.00 Inc. V.A.T. (Mainland U.K.)
Kilncare personalised delivery, connection and instruction is available for all U.K. mainland areas. P.O.A.

See also FK range.
See also Silverline.

36 month guarantee on all parts

The Eurofuser had almost 2 years of on-site testing before being released.
The result is an ultra-reliable, one off kiln size that slots directly in below the renowned FK range of fusing and slumping kilns.
A kiln that is designed for European sales and as such is matched much closer to European fusing kilns rather than the higher specification FK range.

The kiln is made with identical products as the ever proven FK range but with a few noticable changes. The Eurofuser features are.

Features include

• Quartz tube, Kanthal A1 "infra-red" element technology
• Side ventilation with "anti-dust" stainless flaps.
• Kilncare's unique breathing Stainless Steel slatted roof.
• Recessed floor.
• Replaceable, low density brick floor.
• Gas Strut lid lift assistance.
• Ultra-fast response Inconel thermocouple.
• Default control ST315 (9 programs with 9 segments in each).
• 9 pre-set but resettable glass programs.
• Low level electrics to ensure cool running and long lif
• Oven baked, powder coating.
• Lockable castors.
• Can be used single phase or 3 phase and neutral.
• Can be split for tight access into workshops or studios.
• British designed and built.
• 36 month guarantee on ALL parts including the element system.
• CE.

The kiln is heated with a Quartz tube element system in the roof. Other manufacturers refer to this style of heating as Infra-red. The quality of our system is such that we are still yet to replace a single element through failure, in any Eurofuser, in the six years since the kilns introduction.

The floor on the Eurofuser is recessed by 40mm and is made from high grade refractory brick and the kiln is on castors as standard.

A few of the higher specification features of the FK are missing such as the roof vent flaps and independent heatfuse but this merely makes the Eurofuser in-line with the competition. What it does mean is that you get a bigger kiln for the money.

Features that still remain though are the unique stainless steel roof, the sprung front vent flaps, ability to split for narrow access, the same non-ceramic fibre composition.

The kiln is fitted as standard with the ST315 controller, which offers 9 adjustable programs with 9 segments in each program. Each segment is a heat/cool rate, a target temperature and a hold. The controller features an in built heat fuse to protect against over firing.
Full digital display, power used, forward segment feature, pause button are all in the controller.
ST315 details are here.

Eurofusers are fired to 750c with the chosen programmer before despatch to ensure perfect operation, callibration and removal of most of the binder vapours that are released by all kilns on the first firing.

Most of all, The Eurofuser is a Kilncare built kiln and as such offers unrivalled reliability, quality and after sales service.

The kiln is covered by Kilncare 24 months guarantee on ALL parts including the elements.

See also FK range.
See also Silverline.

See also FK range.
See also Silverline.

   Internal Dimensions           External Dimensions     K.W.       Power         Max.             Price     
       WxDxH (mm)                     WxDxH (mm)                       Supply        Temp           Ex V.A.T.

     1000 x 800 x 300             1360 x 1300 x 1240      10          1 or 3         960c          £3890.00         
                                                                                           Phase
                                                                                             & N            

Price of Eurofuser if collected from our factory £4668.00 inc. V.A.T.
Price of Eurofuser if delivered via independant transport  £4872.00 Inc. V.A.T. (Mainland U.K.)
Kilncare personalised delivery, connection and instruction is available for all U.K. mainland areas. P.O.A.