Cub-fuser


                                         undefined

 undefined

 

Cub-fuser

 

  • Interior 510mm x 510mm x 225mm.
  • 3kw single phase.13 amp three pin plug top fitted.
  • 960c maximum temperature
  • Quartz tube "infra-red" heating system.
  • Stainless Steel.
  • lid lift assist.
  • KCR32C digital programer with 16 programs, 32 segments in each program.
  • Can be set in Centigrade or Fahrenheit
  • Fast react thermocouple.
  • Non ceramic fibre construction.
  • High tech "super" backing insulation.
  • No recess to floor.
  • Kilncare unique KCX over temperature, in built protection..
  • Large vent/spy hole with spring return, anti dust flap.
  • FOUR YEARS GUARANTEE on ALL parts INCLUDING the elements.
  • Built and designed by Kilncare in the U.K.

 

The Cub-fuser is here to take its place as, what we believe to be, the largest 13 amp glass kiln in the world that will follow the recommended firing schedules of the major art glass suppliers.
This is done by combining ultra high tech materials with superior design methods.

The Cub-fuser has all of the features that have become ex[ected from the "fuser" familly and is basically a reduced width Pro-fuser. This allows customers with limited space, but larger requirements than the Hobbyfuser can supply, to fulfill thier artistic potential.


undefined

 

The Cub-fuser is fitted with the new Kilncare KCX electronic over temperature safety device.
The KCX is a standard fit on the kiln and is part of the kilns wiring making the Cub-fuser unique in having designated electronic protection as part of the kiln rather than relying on the temperature controller.

Of course, the KCR32C also has its own protection circuits to double up on the safety of this kiln.
The KCR32C is new to the Cub-fuser and is similar to the KCR16 but has a larger capability. 16 fully adjustable programs with each program having 32 fully adjustable segments.

The KCX on the Cub-fuser is preset to 970c. If the kiln temperature reaches this point, then the kiln will be shut off completely and will not start until the kiln is re-powered.


As with the Cub-fuser-D, the Cub-fuser has its Kilncare 3 year guarantee on ALL parts, including the elements, extended to an industry leading 4 years!!!!
This guarantee makes the Cub-fuser the most comprehensively covered kiln available from any manufacturer.

 

 

undefined  Stainless Steel lid assist springs.

 

The lifting and closing of the lid is assisted by a pair of specifically manufactured and designed Stainless Steel coil springs at the rear of the kiln. These are accompanied by a pair of specially designed gas springs to assist with the lower part of the lift/close movement.

 

The kiln lid is made from stainless steel and lined out with non-ceramic fibre,  This method of insulation removes the danger of brick dust or particles dropping onto the glass, so making for a very clean firing environment. It also makes the Cub-fuser incredibly resistant to shock damage.

The capability of the Cub-fuser is due to the "super" backing insulation that makes the kiln ultra efficient and allows such a large capacity to be fired using so little power.

 

 
undefined  Angled vent/spy hole with spring assist.

The front of the kiln has a large vent/peep hole which is closed using a spring assisted flap which houses our unique, anti-dust insulation pad which is taken from our larger fusing kiln models.
The vent/peep hole is angled so that the floor of the kiln and more importantly, your glass, can be seen.

 

 

undefined  Quartz "Infra-red" element system

 

The heating system is in the roof only and utilises the latest technology "infra-red" quartz tube heating elements. This method is extremely hard wearing and strong, yet in the event of an element failure the tubes are both easy and cheap to replace.
The elements are switched off when the lid is opened by an automatic safety switch.

 

The metal work of the base is Stainless steel.

  

                                              

The pre-fitted control is the KCR32C which is detailed on the controls section of our web site. It has 16 programs, each having 32 segments. each segment consists of 1 x rate of climb, 1 x target temperature and 1 x dwell/hold.
9 of the KCR32C programs are pre-set with useful glass cycles for fusing and slumping float, Bullseye and Spectrum glass as well as a Bottle slumping program and a couple of stain cycles. If these programs are not as you would like them, simply alter them to your own preferences.

The KCR32C also has Program Pause, Segment Forwarding and can be set in Centigrade or Fahrenheit.
The KCR32C has its own temperature monitoring relay that will shut the kiln down in the event of an overfire situation.


The KCR32C gets its data from an ultra-fast response, stainless steel thermocouple meaning no lag between the kiln temperature and the KCR32Cs control.
The fact that the thermocouple is stainless steel means it is also resilient to accidental damage.

 

 

We build the Cub-fuser here, in Stoke on Trent, so parts and service will never be an issue.

 

 

 


Cub-fuser-D Stand (Optional)


                         

undefined

             

The Cub-fuser stand has two shelves, one for the kiln to sit on and one for your own use. It raises the kiln by 650mm to a comfortable height.
It is made of steel and is powder coated in our Ultra-marine blue.
The stand is supplied ready for assembly.

 
Lockable wheels for Cub-fuser Stand (optional)

 

          undefined

A further option for the Cub-fuse stand is locking, swiveling wheels.

The wheels are pre-fitted at our factory but the stand is still sent out ready for assembly.


KCR32C Stand (Included)

 undefined         undefined

The KCR32C can be removed from its stand mounted holster to enable it to be hand held for easy and comfortable programming.

MODEL

INTERNAL SIZE
WxDxH (mm)

EXTERNAL SIZE
WxDxH (mm)

kW   POWER  SUPPLY

 

 

Cub-fuser

 

 

510 x 510 x 225

 

 

895 x 810 x 550

 

 

3kW

   

240v

 

undefined 0% finance for 4 mounths using Paypal Credit.

 

Price includes UK delivery and V.A.T.
There may be a delivery surcharge for outlying areas.

Cub-fuser packages
 
 

Please note......if you opt for standard delivery, this is via a independent transport or courier.
The obligation of the delivery company is to get the kiln safely to your address and to deliver to ground level. However, you will need to make your own arrangements to get the kiln to your final site position. Delivery drivers will not assist in getting the kilns through narrow gates e.t.c. The independent drivers are not and cannot be contracted to help site the kiln in your final position.
For assisted delivery please contact us for a quote on Kilncare personal delivery.


The kiln will arrive packaged on a pallet.

The pallet dimensions are 107cm x 107cm.

The Cub-fuser weighs 94kg.

Follow us on Facebook. Click HERE.


                                        

Cub-fuser

 

  • Interior 510mm x 510mm x 225mm.
  • 3kw single phase.13 amp three pin plug top fitted.
  • 960c maximum temperature
  • Quartz tube "infra-red" heating system.
  • Stainless Steel.
  • lid lift assist.
  • KCR32C digital programer with 16 programs, 32 segments in each program.
  • Can be set in Centigrade or Fahrenheit
  • Fast react thermocouple.
  • Non ceramic fibre construction.
  • High tech "super" backing insulation.
  • No recess to floor. Internal floor shelf and props included
  • Kilncare unique KCX over temperature, in built protection..
  • Large vent/spy hole with spring return, anti dust flap.
  • FOUR YEARS GUARANTEE on ALL parts INCLUDING the elements.
  • Built and designed by Kilncare in the U.K.

 

The Cub-fuser is here to take its place as, what we believe to be, the largest 13 amp glass kiln in the world that will follow the recommended firing schedules of the major art glass suppliers.
This is done by combining ultra high tech materials with superior design methods.

The Cub-fuser has all of the features that have become ex[ected from the "fuser" familly and is basically a reduced width Pro-fuser. This allows customers with limited space, but larger requirements than the Hobbyfuser can supply, to fulfill thier artistic potential.


undefined

 

The Cub-fuser is fitted with the new Kilncare KCX electronic over temperature safety device.
The KCX is a standard fit on the kiln and is part of the kilns wiring making the Cub-fuser unique in having designated electronic protection as part of the kiln rather than relying on the temperature controller.

Of course, the KCR32C also has its own protection circuits to double up on the safety of this kiln.
The KCR32C is new to the Cub-fuser and is similar to the KCR16 but has a larger capability. 16 fully adjustable programs with each program having 32 fully adjustable segments.

The KCX on the Cub-fuser is preset to 970c. If the kiln temperature reaches this point, then the kiln will be shut off completely and will not start until the kiln is re-powered.


As with the Cub-fuser-D, the Cub-fuser has its Kilncare 3 year guarantee on ALL parts, including the elements, extended to an industry leading 4 years!!!!
This guarantee makes the Cub-fuser the most comprehensively covered kiln available from any manufacturer.

 

 

undefined  Stainless Steel lid assist springs.

 

The lifting and closing of the lid is assisted by a pair of specifically manufactured and designed Stainless Steel coil springs at the rear of the kiln. These are accompanied by a pair of specially designed gas springs to assist with the lower part of the lift/close movement.

 

The kiln lid is made from stainless steel and lined out with non-ceramic fibre,  This method of insulation removes the danger of brick dust or particles dropping onto the glass, so making for a very clean firing environment. It also makes the Cub-fuser incredibly resistant to shock damage.

The capability of the Cub-fuser is due to the "super" backing insulation that makes the kiln ultra efficient and allows such a large capacity to be fired using so little power.

 

 
undefined  Angled vent/spy hole with spring assist.

The front of the kiln has a large vent/peep hole which is closed using a spring assisted flap which houses our unique, anti-dust insulation pad which is taken from our larger fusing kiln models.
The vent/peep hole is angled so that the floor of the kiln and more importantly, your glass, can be seen.

 

 

undefined  Quartz "Infra-red" element system

 

The heating system is in the roof only and utilises the latest technology "infra-red" quartz tube heating elements. This method is extremely hard wearing and strong, yet in the event of an element failure the tubes are both easy and cheap to replace.
The elements are switched off when the lid is opened by an automatic safety switch.

 

The metal work of the base is Stainless steel.

                                         

The pre-fitted control is the KCR32C, which is detailed on the controls section of our web site. It has 16 programs, each having 32 segments. each segment consists of 1 x rate of climb, 1 x target temperature and 1 x dwell/hold.
9 of the KCR32C programs are pre-set with useful glass cycles for fusing and slumping float, Bullseye and Spectrum glass as well as a Bottle slumping program and a couple of stain cycles. If these programs are not as you would like them, simply alter them to your own preferences.

The KCR32C also has Program Pause, Segment Forwarding and can be set in Centigrade or Fahrenheit.
The KCR32C has its own temperature monitoring relay that will shut the kiln down in the event of an overfire situation.


The KCR32C gets its data from an ultra-fast response, stainless steel thermocouple meaning no lag between the kiln temperature and the KCR32Cs control.
The fact that the thermocouple is stainless steel means it is also resilient to accidental damage.

 

 

We build the Cub-fuser here, in Stoke on Trent, so parts and service will never be an issue.

 

 

 


Cub-fuser Stand (Optional)

undefined

                         


             

The Cub-fuser stand has two shelves, one for the kiln to sit on and one for your own use. It raises the kiln by 650mm to a comfortable height.
It is made of steel and is powder coated in our Ultra-marine blue.
The stand is supplied ready for assembly.

 
Lockable wheels for Cub-fuser Stand (optional)

 

          undefined

A further option for the Cub-fuser stand is locking, swiveling wheels.

The wheels are pre-fitted at our factory but the stand is still sent out ready for assembly.


KCR32C Stand (Included)

 undefined         undefined

The KCR32C can be removed from its stand mounted holster to enable it to be hand held for easy and comfortable programming.

     
     

 

Follow us on Facebook. Click HERE.

          

     
     

 

undefined 0% finance for 4 mounths using Paypal Credit.

 

Price includes UK delivery and V.A.T.
There may be a delivery surcharge for outlying areas.

Cub-fuser packages
 
 

Please note......if you opt for standard delivery, this is via a independent transport or courier.
The obligation of the delivery company is to get the kiln safely to your address and to deliver to ground level. However, you will need to make your own arrangements to get the kiln to your final site position. Delivery drivers will not assist in getting the kilns through narrow gates e.t.c. The independent drivers are not and cannot be contracted to help site the kiln in your final position.
For assisted delivery please contact us for a quote on Kilncare personal delivery.


The kiln will arrive packaged on a pallet.

The pallet dimensions are 107cm x 107cm.

The Cub-fuser weighs 94kg.

Follow us on Facebook. Click HERE.

  • View Product Image
  • View Information
  • View Specification
click icons for more information