Click icons for details and prices

Simple to use the 3300 range of controllers has been developed to provide accurate programming of complex firing processes in a simple user-friendly design.

Powerful Programming accuracy and flexibility are key functions of the 3300. Satisfying most processes that require a series of regulated controlled temperature ramps and timed controller sequences.

Each ramp is controllable either by rate per hour or by time taken to reach a set point. In rate per hour mode, the controller can be set down to as low as 1°c/hr, whilst in time taken to reach a set point mode it is possible to set even lower, kiln allowing of course.

A pause button allows the process to be held at any point and can be timed or held until the button is repressed. An information button can be pressed at any point during the firing, and will display items such as power used and controller set point.

Flexibility is the key to the design and use of the 3300 program controller. The operator just selects or by-passes the ramp / dwell and then selects the next segment in the sequence to daisy chain the required number of ramps and dwells until the desired control profile is created.

There are five models to choose from:-

• 3300/1 1 Program of Delay Start - 2 Ramps – 2 Dwells    

• 3300/2 10 Program of Delay Start - 4 Ramps – 4 Dwells   

• 3300/3 10 Program of Delay Start - 16 Ramps -16 Dwells 

• 3300/4 as 3300/3 Plus Event Control             

• 3300/5 as 3300/4 Plus Zone Control                      
  

Features

• Large red L.E.D. display showing kiln temperature and program segment number
• Use in degrees centigrade or Fahrenheit
• Set in degrees per hour or “ time to reach set point”
• Program pause button
• Segment forward button
• Power used indication
• 30 amp relay as standard
• On/Off switch
• Hidden lock button
• Wall mounting bracket
• Broken thermocouple protection
• Overfire alarm
• Power cut continue
• Button bleeper on adjusts
• For use with thermocouples K, N, R or S
• Made in Britain
  

  
  Prices

  3300/1     £215.00

  3300/2     £267.00

  3300/3     £278.00

  3300/4     £357.00

  3300/5     £546.00

  2m Control cable complete with plug for Kilncare kilns £55.00

  2m Control cable complete with Harting plug for other kilns. £55.00

  2m Control cable only £25.50

  Prices exclude V.A.T.

Simple to use the 3300 range of controllers has been developed to provide accurate programming of complex firing processes in a simple user-friendly design.

Powerful Programming accuracy and flexibility are key functions of the 3300. Satisfying most processes that require a series of regulated controlled temperature ramps and timed controller sequences.

Each ramp is controllable either by rate per hour or by time taken to reach a set point. In rate per hour mode, the controller can be set down to as low as 1°c/hr, whilst in time taken to reach a set point mode it is possible to set even lower, kiln allowing of course.

A pause button allows the process to be held at any point and can be timed or held until the button is repressed. An information button can be pressed at any point during the firing, and will display items such as power used and controller set point.

Flexibility is the key to the design and use of the 3300 program controller. The operator just selects or by-passes the ramp / dwell and then selects the next segment in the sequence to daisy chain the required number of ramps and dwells until the desired control profile is created.

There are five models to choose from:-

• 3300/1 1 Program of Delay Start - 2 Ramps – 2 Dwells    

• 3300/2 10 Program of Delay Start - 4 Ramps – 4 Dwells   

• 3300/3 10 Program of Delay Start - 16 Ramps -16 Dwells 

• 3300/4 as 3300/3 Plus Event Control             

• 3300/5 as 3300/4 Plus Zone Control                      
  

Features

• Large red L.E.D. display showing kiln temperature and program segment number
• Use in degrees centigrade or Fahrenheit
• Set in degrees per hour or “ time to reach set point”
• Program pause button
• Segment forward button
• Power used indication
• 30 amp relay as standard
• On/Off switch
• Hidden lock button
• Wall mounting bracket
• Broken thermocouple protection
• Overfire alarm
• Power cut continue
• Button bleeper on adjusts
• For use with thermocouples K, N, R or S
• Made in Britain

Prices

3300/1     £215.00

3300/2     £267.00

3300/3     £278.00

3300/4     £357.00

3300/5     £546.00

2m Control cable complete with plug for Kilncare kilns £55.00

2m Control cable complete with Harting plug for other kilns. £55.00

2m Control cable only £25.50

Prices exclude V.A.T.